六头螺杆马达三维动态仿真-固体力学专业论文.docx

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 Abstract Different from the reciprocating motor, Screw motor is a positive displacement motor, also known as fixed displacement motor, with the same types of pumps, compressors are together evolve from the study that is invented by a French engineers. Because of its torque, smooth work, are widely used in oil drilling, geological exploration and defense projects. at present screw motor still have many problems. Such as sealing leaks, vibration and deform at high temperature of rubber bushing, life is short and so on .Currently the direct interaction on zhe screw drill of fluid-structure simulation is very small. Most are studies of screw pump, ignoring the problem of the hydraulic drive and contact seals. For the simulation of screw drill, as it relates to the many complex issues. Now the mainstream simulation algorithm can not solve these problems, but the screw hole in the industrial,life, defense and other areas have important uses, so it is very essential to their research, it is very important to looking for the more generic simulation method. Simulation of the screw motor can be seen as a problem that the rotor are rotating at high speed and collision that is drive by high-pressure liquid, in this paper, according the cycloid and bone line of motor screw, creating a model of six head screw motor. the model considers the problem that the super-elastic of rubber bushing, friction between rotor and stator, and a problem that the contact seal under fluid-structure interaction. Model basically meet the requirements of hydraulic drive. by the analysis of numerical simulation, this article has been get the movement of the rotor, deformation of the rubber bush and force status. Also studied the pressure difference cycle and axial force in both conditions that have anti-torque and no anti-torque. In summary study of theory and numerical methods in this article is very important to study the fluid-structure interaction