程序结构力学大作业.docxVIP

程序结构力学大作业 结81 孙玉进 该程序可计算任意平面结构任意阶频率（包括重频），以及任意阶振型（包括重频对应正交振型）。计算时，振型不包括不包括单元固端型振型。 ? !****************************module NumKind!***************implicit noneinteger (kind(1)),parameter :: ikind = kind(1), rkind = kind(0.D0)real (rkind),parameter :: Zero = 0._rkind, One = 1._rkind, Two = 2._rkind, Three= 3._rkind, Four = 4._rkind, Five = 5._rkind, Six = 6._rkind, Seven= 7._rkind, Eight = 8._rkind, Nine = 9._rkind, Ten =10._rkind, Twelve=12._rkindend module NumKind !**************module TypeDef!**************use NumKindimplicit none type :: typ_Jointreal (rkind) :: x,yinteger (ikind) :: GDOF(3)end type typ_Joint type :: typ_Elementinteger (ikind) :: JointNo(2),GlbDOF(6)real (rkind) :: Length,CosA,SinA,EI,EA,massend type typ_Element type :: typ_JointLoadinteger (ikind) :: JointNo,LodDOFreal (rkind) :: LodValend type typ_JointLoad type :: typ_ElemLoadinteger (ikind) ::ElemNo,Indxreal (rkind) :: Pos,LodValend type typ_ElemLoad contains !===================================subroutine SetElemProp (Elem, Joint)!===================================type (typ_Element),intent(in out) :: Elem(:)type (typ_Joint),intent(in) :: Joint(:)integer(ikind)::ie,NElemreal(rkind)::x1,x2,y1,y2NElem=size(Elem,dim=1)do ie=1,NElemx1=Joint(Elem(ie)%JointNo(1))%xy1=Joint(Elem(ie)%JointNo(1))%yx2=Joint(Elem(ie)%JointNo(2))%xy2=Joint(Elem(ie)%JointNo(2))%yElem(ie)%Length=sqrt((x1-x2)**2+(y1-y2)**2)Elem(ie)%CosA=(x2-x1)/Elem(ie)%LengthElem(ie)%SinA=(y2-y1)/Elem(ie)%LengthElem(ie)%GlbDOF(1:3)=Joint(Elem(ie)%JointNo(1))%GDOF(:)Elem(ie)%GlbDOF(4:6)=Joint(Elem(ie)%JointNo(2))%GDOF(:)end doreturnend subroutine SetElemProp !======================================subroutine TransMatrix (ET, CosA,SinA)!======================================real(rkind),intent(out) :: ET(:,:)real(rkind),intent(in) :: CosA,SinA! ET could be 2x2, 3x3 or 6x6 depending size(ET)ET = ZeroET(1,1:2) = (/ CosA, SinA /)ET(2,1:2) = (/-SinA, CosA /)if (size(ET,1) 2) ET(3,3) = Oneif (