EPA 6010d-2018 美国环保标准.pdf

METHOD 6010D INDUCTIVELY COUPLED PLASMA—OPTICAL EMISSION SPECTROMETRY Table of Contents 1.0 SCOPE AND APPLICATION 2 2.0 SUMMARY OF METHOD 4 3.0 DEFINITIONS 4 4.0 INTERFERENCES 5 5.0 SAFETY 9 6.0 EQUIPMENT AND SUPPLIES 9 7.0 REAGENTS AND STANDARDS 10 8.0 SAMPLE COLLECTION, PRESERVATION, AND HANDLING 16 9.0 QUALITY CONTROL16 10.0 CALIBRATION AND STANDARDIZATION22 11.0 PROCEDURE 25 12.0 DATA ANALYSIS AND CALCULATIONS26 13.0 METHOD PERFORMANCE 27 14.0 POLLUTION PREVENTION 27 15.0 WASTE MANAGEMENT 27 16.0 REFERENCES28 TABLE 1 29 TABLE 2 30 TABLE 3 31 TABLE 4 32 TABLE 5 33 FIGURE 1 34 APPENDIX A 35 SW-846 is not intended to be an analytical training manual. Therefore, method procedures are written based on the assumption that they will be performed by analysts who are formally trained in at least the basic principles of chemical analysis and in the use of the subject technology. In addition, SW-846 methods, with the exception of required method use for the analysis of method-defined parameters, are intended to be guidance methods which contain general information on how to perform an analytical procedure or technique which a laboratory can use as a basic starting point for generating its own detailed standard operating procedure (SOP), either for its own general use or for a specific project application. The performance data SW-846 Update VI 6010D - 1 Revision 5 July 2018 included in this method are for guidance purposes only and are not intended to be and must not be used as absolute qu