奥洪康_日本石油化工_LCP S475 MSDS.docVIP

NIPPON PETROCHEMICALS CO., LTD. XYDAR DEPARTMENT 3-1 YAKO 2-CHOME, KAWASAKI-KU KAWASAKI-CITY, 210 JAPAN MATERIAL SAFETY DATA SHEET XYDAR S475 MSDS NO:NMLX089 MANUFACTURER/SUPPLIER: NIPPON PETROCHEMICALS CO., LTD. XYDAR DEPARTMENT 3-1 YAKO 2-CHOME KAWASAKI-KU KAWASAKI-SHI KANAGAWA 210-8545 JAPAN IMPORTANT COMPONENTS: Aromatic polyester polymer: trade secret. No exposure limit established. Fiberglass: (CAS 65997-17-3) ACGIH TLV 10 mg/m3 (as dust). Talc:(CAS 14807-96-6) ACGIH TLV 10 mg/m3, respirable dust; OSHA PEL 20 mppcf. Carbon black: (CAS 1333-86-4), 0-2%; ACGIH TLV 3.5 mg/m3; OSHA PEL 3.5 mg/m3. INFORMATION ON INGREDIENTS: Aromatic polyester polymer 45-65 wt% Fiberglass 10-30 wt% Talc 15-35 wt% Carbon black 0-10 wt% WARNING STATEMENT: Attention: This product has been evaluated and does not require any hazard warning label under the OSHA Hazard Communication Standard. However, handling and/or processing of this material may generate a nuisance dust which can cause mechanical irritation of the eyes, skin, nose and throat. HMIS/NFPA CODES: (HEALTH; 1)(FLAMMABILITY; 1)(REACTIVITY; 0) APPEARANCE AND ODOR: Odorless, black pellets. HEALTH HAZARD INFORMATION EYE EFFECT: No significant irritation expected other than possible mechanical irritation. FIRST AID: Flush eyes with plenty of water. Get medical attention if irritation persists. PROTECTION: None required; however, use of eye protection is good industrial practice. SKIN EFFECT: No signification expected other than possible mechanical irritation. FIRST AID: Wash exposed skin with soap and water. PROTECTION: None required; however, use of protective gloves/clothing is good industrial practice. PAGE 2 XYDAR S475 MSDS NO: NMLX089 HEALTH HAZARD INFORMATION - CONTINUED INHALATION EFFECT: No significant health hazards identified. See Toxicology Section. FIRST AID: If adverse effects occur, remove to uncontaminated area. Get medical attention. PROTECTION: None required; however, use of adequate ventilation is good indust