泾河致密油藏水平井速钻桥塞分段改造实践.docxVIP

文章编号：1000 – 7393（2014）03 – 文章编号：1000 – 7393（2014）03 – 0072 – 03 doi:10.13639/j.odpt.2014.03.018 泾河致密油藏水平井速钻桥塞分段改造实践 王 越 陈付虎 高志军 姚昌宇 （中石化华北分公司工程技术研究院，河南郑州 450006） 引用格式：王越，陈付虎，高志军，等 . 泾河致密油藏水平井速钻桥塞分段改造实践［J］. 石油钻采工艺，2014，3（6 3）：72-74. 摘要：泾河油田储层埋藏浅，储隔层应力差小，给压裂改造带来较大难度，前期采用水平井裸眼管外封隔器压裂工艺，取得 了一定的改造成效 , 但该工艺为预置管柱完井，具有不适应后期改造的缺陷。为解决这一问题，将完井方式变更为套管固井。 针对泾河油田储层压裂改造难点，对施工管柱、井口、入井压裂材料、裂缝参数及施工参数等进行了一系列优化，并在 JH32P1 井 进行了速钻桥塞多级分段压裂工艺试验。JH32P1 井现场历时 4 d 完成施工，压后钻塞顺利。该井试油期间日产原油 14.2 t，与 邻井相近储层条件采用裸眼封隔器压裂工艺相比，取得显著的增产效果。该工艺在泾河油田的成功应用，为速钻桥塞分段压裂 工艺在泾河油田的推广积累了经验。 关键词：泾河油田；速钻桥塞；水平井；分段压裂 中图分类号：TE357 文献标识码：B Practice of multistage fracturing by fast drilling out bridge plug in horizontal wells in Jinghe competent oil reservoir WANG Yue, CHEN Fuhu, GAO Zhijun, YAO Changyu （Engineering Technology Research Institute, Huabei Branch of SINOPEC, Zhengzhou 450006, China） Abstract: The reservoirs of Jinghe Oilfield have shallow burial depth and low stress difference between the reservoir and isolat- ing layer, which pose great difficulty in fracturing. Previously external packer fracturing technology in horizontal openhole was used and was effective to some extent; but this technology is preset string completion and not suitable for later stimulation. So in order to solve this problem, the completion method is changed to casing cementing. In view of the difficulty in fracturing the Jinghe Oilfield, we optimized the operation string, wellhead, downhole fracturing materials, fracture parameters and construction parameters, etc. and also conducted tests on stage fracturing by fast drilling bridge plugs in JH32P1 Well. This well was fractured with 4 days, and plug drilling was successful after fracturing. During oil test, this well produced 14.2 t/d oil; compared with offset wells of similar reservoir conditions but fractured with openhole packers, this production was increased . The significantly successful application of this technology in Jinghe Oilfield provides experiences for promotion of the