压力变送器 压力传感器.docVIP

Pressure transmitters model PTMEx are suitable for liquid and ga-seous media, that do not corrode 1.4404 (316 stainless steel. When connecting, the instruments feature an own intrinsically safe certificated circuitry, type of protection II2 G EEx ib IIC T6 according to ATEX. T wo basic models are available: Overpressure Model PTMEx 0-1 bar to 0-160 bar Model PTMExFB 0-100 mbar to 0-400 bar both versions also for vacuum- and compound-gauges (with ventilation to atmosphereAbsolute pressure (a 0-1 bar to 0-25 bar (reference point zero absoluteThe pressure transmitters are temperature-compensated and supply a calibrated output signal. The robust construction makes an appli-cation under difficult conditions possible, e.g. in shipping. The pressure transmitters fulfil the stability requirements for the industrial sector and residential areas according to the European Norm and therefore grant an electromagnetic compatibility.The silicone oil filled piezoresistive sensor is installed in the pressure transmitter element and welded in the pressure connection piece. The elementary sensor is separated from the medium by a thin stainless steel diaphragm. Construction Type Installation length: standard Process Connection PTMEx : G ? B (? BSP, 1.4404 (316 stainless steel PTMExFB: pressure connection with membrane flush welded G ? B ( ? BSP according to DIN 3852, but G 1 B with O-Ring NBR for pressure range 1 barMeasuring Cell / Sensor Piezoresistive measuring cell: 1.4404 (316 stainless steelDiaphragm (placed inside: 1.4404 (316 stainless steelSensor Sealing – (Measuring cell welded Case 1.4404 / 1.4301 (316 / 304 stainless steel, case protection type IP 65Internal space ventilation for pressure ranges 16 bar by plug screw fitting Pressure Ranges / Overload Pressure range-dependent, typically at least 2-fold, details see pressure range-table on reverse side Output Signal 4...20 mA, 2-wire technique (others see optionsMeasuring Accuracy1 ± 0.2% of full scale value, pressure r