引言电测与仪表.doc

PAGE PAGE 1 基于单片试样法的电工钢片智能化动态磁特性测量系统设计 蔡恩雨1,2 孙晓华1 (1.西安交通大学电气工程学院，陕西 西安 710049；2.国电联合动力技术有限公司风电设备及控制国家重点实验室，北京 100039） 摘要：为了在生产过程中准确、便捷地测量电工钢片的动态磁特性，根据磁感应强度和磁场强度测量原理，文章设计制作了符合国家标准的单片试样，通过实验调试，选取合适的数据采集和信号处理设备，使用LabWindows/CVI虚拟仪器软件平台搭建了基于单片试样法的电工钢片智能化动态磁特性测量系统，并为后续加入谐波分析等扩展功能设置了LabWindows/CVI软件平台与Matlab软件的接口。通过对采集信号、磁特性曲线以及测量系统K值标定的分析，判定测量系统稳定性、有效性，为研制其他试样及静态磁特性测量系统工作提供了理论指导和实际经验。 关键词： 单片试样；动态磁特性；虚拟仪器；LabWindows/CVI； 中图分类号：TM936 文献标识码：A 文章编号：1001-1390（2015）00-0000-00 Design of intelligent measurement system for dynamic magnetic properties of electrical steel slice in based ona single sheet sample Cai Enyu1,2，, Sun Xiaohua1 (1.School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049 2. State Key Laboratory of Wind Power Equipment and Control, Guodian United Power Technology Company Co.,Ltd., Beijing 100039,China, China) Abstract：: Single sheet sample is manufactured that conforms to the related national standards according to the principle of magnetic induction intensity and magnetic field strength related national standards for measuring material dynamic magnetic properties of electrical steel slices conveniently and rapidly in the process of production. AAn intelligent measurement system for dynamic magnetic properties is built in virtual instrument software platform of LabWindows/CVI platform based on the single sheet sample. In addition, the software interface is set between LabWindows/CVI and Matlab for updating the system and increasing functions later such as harmonic analysis. technology of virtual instrument after theoretical analysis of magnetic field strength and magnetic flux density. And the acquisition and processing equipments are selected via experimental debugging. In addition, the software interface is set between LabWindows/CVI and Matlab for updating the system and increasing functions later such as harmonic analysis. Finally, the analysis of acquired acquisition signals, magnetic property curves of measu