设计一个可自由调整frequency.docVIP

PAGE PAGE 1 CO6021/COA002 Digital Signal Processing Handout 8 12 by P.C. Chang DSP Final Projects -- 2009 Project 1. Audio equalizer -- 設計一個可自由調整frequency response 之 equalizer (等化器), 規格如下： (1) sample rate : 44.1 kHz (2) 20 kHz frequency response set to 0 (3) using IIR filter, order less than 16 (4) design a user interface to adjust frequency response (5) 7個等化中心頻率：125, 250, 500, 1k, 2k, 4k, 8k Hz (6) 可調範圍 –10 dB ~ +10 dB at any frequency from 100 to 10k Hz (7) 評比標準：perceptual testing, computational complexity (filter coefficient calculation and audio signal filtering), ripple, adjacent channel response error. 使用test audio 1 and audio 2 (mp3 reconstructed) (8) The report must include tables with the following items:1) 是否會聽到noise ?2) complexity3) ripple4) delay5) 自行開發? Project 2. DTMF detector – design a filter bank with 8 BPFs that can detect correct digits represented by DTMF signals. The specification is listed as follows: DTMF generation interface：referred to DTMF tone generator in “dsptutor” website. / DTMF signal format：input *.wav format signal with sampling rate 44.1 kHz. output interface：display shows the detected digits. Using IIR or FIR filter Filter bank spec.：as used on touch tone phones. (you find it !) Criteria：accurate detection rate.(%) Test pattern： 1) DTMF sequence generated by yourself 2) DTMF sequence generated by dsptutor website 3) DTMF sequence generated by a touch-tone telephone set. The report must include tables with the following items: 1) filter type (IIR、FIR?) 2) filter order 3) overall system complexity Project 3. Sampling rate converter -- 設計 sampling rate converter, 規格如下： (1) 轉換 sampling frequency from 32 kHz or 48 kHz 到 44.1 kHz (2) 評比標準：low complexity (less than 10 MIPS* will have extra credit ), low memory requirement, transparency converter (low distortion, high SNR, by perceptual testing ). [Reference] (1) “A Course in Digital Signal Processing”, Boaz Porat, pp. 473 – 481, 1997 (2) “A Real-time Method for Sample