一种软基于彩色CCD图像传感器的温度场测量系统的设计与实现.docVIP

Design and Implementation of a Soft-measuring System for High-temperature Field Based on Color CCD Image Sensor LI Yuxiao, LI Sheng, and Ye Kuntao Department of Science, Jiangxi University of Science and Technology, Ganzhou 341000, China The soft-measuring system consists of an optical lens, a color CCD camera, an image acquisition card, a computer and associated measuring software based on colorimetric temperature measurement. Using the system, the temperature distribution of a high-temperature field can be measured and then displayed on the screen. A method of adjusting the intensity of light is developed to expand the range of the measuring temperature of the system, and the calibration experiments through blackbody furnace are adopted to calibrate the soft-measuring system. The errors of the measurement caused by the non-ideal spectrum response of CCD image sensor are corrected. M ulti-spectral segmenting is applied on the image of the high-temperature field, thus various high- temperature noises in the color image can be reduced or even eliminated. The experiment indicates the soft-measuring instrumentation meets the high-temperature detecting requirements of industrial production due to its high accuracy and reliability. Ⅰ. Introduction In the process of melting, melt temperature is a very important parameter which directly affects the quality of melting products. So scientists in all countries have concerned the measuring temperature technology in modern metallurgy process, and did a lot of research work, obtained some achievements [1-2]. The United States FLUKE company is a professional electronic testing tools manufacturer, its representative products in measuring temperature field are infrared thermography and infrared thermometer. Thermography is mainly used in equipment fault detection and maintenance, it always works below 600°C; the highest measuring temperature of infrared thermometer may be up to 1000°C, but everytime it can only measure temperature