热力耦合 声学车间1-ia.doc 15页

  • 0
  • 0
  • 0
  • 约2.52万字
  • 2020-01-25 发布
文档工具:
    1. 1、本文档共15页,可阅读全部内容。
    2. 2、本文档内容版权归属内容提供方,所产生的收益全部归内容提供方所有。如果您对本文有版权争议,可选择认领,认领后既往收益都归您。
    3. 3、本文档由用户上传,本站不保证质量和数量令人满意,可能有诸多瑕疵,付费之前,请仔细先通过免费阅读内容等途径辨别内容交易风险。如存在严重挂羊头卖狗肉之情形,可联系本站下载客服投诉处理。
    4. 文档侵权举报电话:19940600175。
    PAGE 2 W REF workshopnumber \h W REF workshopnumber \h 1.PAGE 14 Copyright 2005 ABAQUS, Inc. REF coursetitle \h Structural-Acoustic Analysis with ABAQUS Workshop 1 Acoustic Evaluation of a Simple Air Duct Section Interactive Version Copyright 2005 ABAQUS, Inc. Structural-Acoustic Analysis with ABAQUS Note: This workshop provides instructions in terms of the ABAQUS GUI interface. If you wish to use the ABAQUS Keywords interface instead, please see the “Keywords” version of these instructions. Please complete either the Keywords or Interactive version of this workshop. Goals When you complete this workshop, you will be able to: Determine the natural frequencies of an acoustic domain. Determine the steady-state dynamic response of an acoustic system. Define a classical acoustic plane-wave absorbing boundary. Define acoustic excitation loads. View real and imaginary components of acoustic pressure. Create path plots of acoustic output data. Introduction A simple acoustic model of a section of air duct will be used to introduce some of the basic analysis techniques that can be applied to an acoustic mesh. In this workshop you will add important modeling details to complete the supplied model database which already contains basic modeling data such as geometry, mesh, and material definitions, for the air duct section shown in Figure W1–1. The model for this workshop represents only the air inside the duct. The acoustic natural boundary condition of infinite impedance at a mesh boundary implies rigid duct walls. You will perform natural frequency extraction analyses with different sets of acoustic boundary conditions assigned to the ends of the duct. You will then perform a series of steady-state dynamic response analyses on the model using different excitation methods. The steady-state dynamic analyses will also include the definition of acoustic plane-wave absorbing boundary impedance at one end of the duct to investigate postprocessing of traveling waves

    文档评论(0)

    • 内容提供方:138****3419
    • 审核时间:2020-01-25
    • 审核编号:7050026131002113

    相似文档