热力耦合 声学车间4-ia.docVIP

PAGE 2 W REF workshopnumber \h W REF workshopnumber \h 4.PAGE 6 Copyright 2005 ABAQUS, Inc. REF coursetitle \h Structural-Acoustic Analysis with ABAQUS Workshop 4 Underwater shock analysis Interactive Version Copyright 2005 ABAQUS, Inc. Structural-Acoustic Analysis with ABAQUS Note: This workshop provides instructions in terms of the ABAQUS GUI interface. If you wish to use the ABAQUS Keywords interface instead, please see the “Keywords” version of these instructions. Please complete either the Keywords or Interactive version of this workshop. Goals When you complete this workshop, you will be able to: Set up and analyze underwater shock problems. Determine the transient shock response of a submerged cylinder excited by a blast load. Understand the concept and the implementation of the Scattered Wave formulation. Define acoustic excitation loads due to incident wave fields such as due to an underwater explosion. Add reflective surfaces and examine the change in results. Introduction For this workshop, we will study a classical underwater shock example problem: a submerged infinitely long elastic cylinder excited by a planar shock wave from a charge that is relatively close to the structure. The effect of the pressure wave reflecting off the bottom surface (the seabed) is included in the second part of this workshop. Preliminaries Enter the working directory for this workshop: ../acoustics/interactive/workshop4 Run the script ws_acoustic_cylinder.py using the following command: abaqus cae startup=ws_acoustic_cylinder.py The above command creates an ABAQUS/CAE database named cylinder.cae in the current directory. The models created within this database file contain basic modeling data such as geometry, material, and mesh definitions. In this workshop you will add important modeling details to complete the models, which will help you to leverage the ABAQUS and acoustics knowledge that you have accumulated thus far, and quickly determine the user inputs r