NFPA58AMD1-2010 国外国际标准.pdf

Tentative Interim Amendment NFPA 58 Liquefied Petroleum Gas Code 2011 Edition Reference: 1, 6.6.6, A.6.6.6, and TIA 11-1 (SC 10-8-23/TIA Log #986) Note: Text of the TIA issued and incorporated into the text of 1, 6.6.6, A.6.6.6, and therefore no separate publication is necessary. 1. Revise text to read as follows: 1 ASME containers installed underground, partially underground, or as mounded installations shall incorporate provisions for cathodic protection and shall be coated with a material recommended for the service that is applied in accordance with the coating manufacturer’s instructions. 6.6.6 Installation of Underground and Mounded Containers. * ASME container assemblies intended for underground installation, including interchangeable aboveground–underground container assemblies, shall be installed underground in accordance with (A) through (L). (A through H unchanged.) (I)*A corrosion protection system shall be installed on new installations of underground steel containers, unless technical justification is provided to and is approved by the authority having jurisdiction. The corrosion protection system shall include: (1) A container coating complying with 1 (2) A cathodic protection system that consists of a sacrificial anode(s) or an impressed current anode (3) A means to test the performance of the cathodic protection system (J)* Cathodic protection systems installed in accordance with (I) above shall be monitored by testing and the results documented. Confirming tests shall be described by one of the following: (1) Producing a voltage of -0.85 volts or more negative, with reference to a saturated copper-copper sulfate half cell (2) Producing a voltage of -0.7