3a充电ic,3a单节锂离子电池充电管理ic,slm6600.docxVIP

SLM6600 3A Synchronous Buck Li-Ion Battery Charger Description Features The SLM6600 is a 3A single cell Li-io n 1.0MHz Fixed Switching Frequency battery charger applied for 5V wall adapters. It High Efficiencyup to 92% 3.5A MaximumCharge Current utilizes 1.0MHz synchronous buck converter topology to reduce power dissipation and No External MOSFET or Blocking Diode therefore reachesa highefficiencyup to92%. Required The SLM6600 includes complete charge Preset 4.2V Charge Voltage with ±1% termination circuitry, automatic recharge, and a Accuracy ±1% 4.2V float voltage. It also has other features AutomaticRecharge include output short-circuit protection, battery Charge State Pairs of Output, No Battery temperature monitor,overheating protection, and and Fault StatusDisplay no blocking diode isrequired. 70uA SupplyCurrent in Shutdown The SLM6600 is available in ESOP8 package 2.9V Trickle Charge with heat sink. Its few external component count Soft-Start LimitsInrush Current makes the SLM6600 a high-efficient battery Battery Temperature Monitoring chargerideallysuited for portable applications. Short-Circuit Protection Available in 8-Pin ESOP Package Absolute Maximum Ratings Vcc：-0.3V~6.5V Applications BAT：-0.3V~7V CellularTelephones LX：-0.3V~7V MP3, MP4Players VS：-0.3V~7V GPS,Digital Cameras NCHRG：-0.3V~7V ElectronicDictionaries NSTDBY：-0.3V~7V Portable Devices, Chargers TS：-0.3V~7V BATShort-Circuit Duration：Continuous Maximum Junction Temperature：145℃ Operating Temperature Rang: -40℃~85℃ StorageTemperatureRange：-65℃~125℃ Lead Temperature（Soldering, 10 sec）260 ℃ 1/11 SLM6600 3A Synchronous Buck Li-Ion Battery Charger Complete Charge Cycle ApplicationTips Effective heat dissipation is the key to ensure the chip to long-term maintain high charge current. In order to maximize the charge current, PC board layout design should be optimized to provide ICwithin ESOP8 package effective heat dissipation. The thermal path for the heat generated by IC is from the die to lead fra