em4205em4305完整数据使用指南.docVIP

EM MICROELECTRONIC - MARIN SA EM4205-EM4305 512 bit Read/Write Multi-purpose Contactless Identification Device Description EM4205/4305 is a CMOS integrated circuit intended for use in electronic Read/Write RF transponders. It is suitable for low cost solutions like animal tagging applications. The IC communication protocol is compatible with the EM4469/4569 family. The main difference between the EM4205 and EM4305 is that: ? EM4305 are bumped with enlarged pads for the two coil inputs. The enlarged bumped pads of the EM4305 transponder are intended for direct antenna connection avoiding the need of a module. ? EM4305 offers a 330pF resonant capacitor version The IC is powered by picking up energy from a continuous 125 kHz magnetic field via an external coil, which together with the integrated capacitor form a resonant circuit. The IC reads out data from its internal EEPROM and sends it out by switching on and off a resistive load in parallel to the coil using a large modulation index. Commands and EEPROM data updates can be executed by 100% AM modulation of the 125 kHz magnetic field. The EM4205/4305 supports bi-phase and Manchester data encodings. The EM4205/4305 operating modes are stored in the EEPROM configuration word. All EEPROM words can be write-protected by setting protection bits. Features ? 512 bit EEPROM organized in 16 words of 32 bit ? 32 bit unique identifier (UID) ? 32 bit Password read and write protection ? ISO 11784 / 11785 Standard Compliant ? Lock feature converts EEPROM words into Read Only ? Two data encodings: Manchester and Bi-phase ? Multi-purpose data rate: 8, 16, 32, 40 and 64 RF clocks ? Reader Talk First feature ? Compatible with EM4469/EM4569 communication protocol ? 100 to 150 kHz frequency range ? On-chip rectifier and voltage limiter ? No external supply buffer capacitor needed ? -40°C to +85?C temperature range ? Very low power consumption ? Enlarged bumped pads (200 ?m x 400 ?m) for direct connection of coil (EM4305) ? EM4