核电站辅机要求balanceofplant.docVIP

INL/EXT-06-11232 Rev.1 Balance of Plant Requirements for a Nuclear Hydrogen Plant Bradley Ward April 2006 The INL is a U.S. Department of Energy National Laboratory operated by Battelle Energy Alliance INL/EXT-06-11232 Rev. 1 Balance of Plant Requirements for a Nuclear Hydrogen Plant Bradley Ward April 2006 Idaho National Laboratory Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy Office of Nuclear Energy Under DOE Idaho Operations Office Contract DE-AC07-05ID14517 SUMMARY This document describes the requirements for the components and systems that support the hydrogen production portion of a 600 megawatt thermal (MWt) Next Generation Nuclear Plant (NGNP). These systems, defined as the “balance-of-plant” (BOP), are essential to operate an effective hydrogen production plant. Examples of BOP items are: heat recovery and heat rejection equipment, process material transport systems (pumps, valves, piping, etc.), control systems, safety systems, waste collection and disposal systems, maintenance and repair equipment, heating, ventilation, and air conditioning (HVAC), electrical supply and distribution, and others. The requirements in this document are applicable to the two hydrogen production processes currently under consideration in the DOE Nuclear Hydrogen Initiative. These processes are the sulfur iodide (S-I) process and the high temperature electrolysis (HTE) process. At present, the other two hydrogen production process—the hybrid sulfur-iodide electrolytic process (SE) and the calcium-bromide process (Ca-Br)—are under flow sheet development and not included in this report. While some features of the balance-of-plant requirements are common to all hydrogen production processes, some details will apply only to the specific needs of individual processes. iv CONTENTS 1. INTRODUCTION.............................................................................................................................. 3 2. CANDIDATE HYDROGEN PRODUCTIO