ETAG 001-4 Metal Anchors for use in Concrete Part 4：Deformation-controlled expansion anchors混凝土用金属锚具-变形控制锚栓.pdf

European Organisation for Technical Approvals Europäische Organisation für Technische Zulassungen Organisation Européenne pour l’Agrément Technique ETAG No 001 Edition July 1998 GUIDELINE FOR EUROPEAN TECHNICAL APPROVAL OF METAL ANCHORS FOR USE IN CONCRETE Amended November 2006 Part four: DEFORMATION-CONTROLLED EXPANSION ANCHORS EOTA Avenue des Arts 40 Kunstlaan B - 1040 Brussels INTRODUCTORY NOTES In this Part requirements, criteria and test information additional to Part 1 and applicable only to deformation- controlled expansion anchors are given. The same numbering of paragraphs as in Part 1 is used. If a paragraph is not mentioned, then the text in Part 1 applies without modification. TABLE OF CONTENTS PART FOUR DEFORMATION-CONTROLLED EXPANSION ANCHORS 2 SCOPE 2.1 Anchors 2.1.1 Types and operating principles 3 TERMINOLOGY 3.2 Particular terminology and abbreviations 3.2.1 General 4 REQUIREMENTS FOR WORKS 4.1 Mechanical resistance and stability (ER 1) 4.1.2 Suitability 4.1.2.8 Delivery of unassembled anchors 5 METHODS OF VERIFICATION 5.1 Methods related to 4.1 (mechanical resistance and stability) 5.1.2 Tests for suitability 5.1.3 Tests for admissible service conditions 6 ASSESSING AND JUDGING THE FITNESS OF ANCHORS FOR AN INTENDED USE 6.1 Assessing and judging related to 4.1 (mechanical resistance and stab