GSO-37-2005机动车：碰撞强度试验方法 第2部分：移动障后部碰撞.pdf

ﺔﻴﺒﺭﻌﻟﺍﺞﻴﻠﺨﻟﺍ لﻭﺩﻟﻥﻭﺎﻌﺘﻟﺍﺱﻠﺠﻤلﻭﺩﻟﺱﻴﻴﻘﺘﻟﺍﺔﺌﻴﻫ STANDARDIZATION ORGANIZATION FOR G.C.C (GSO) GSO 37/2005 ﺕﺎﻤﺩﺼﻟﺍلﻤﺤﺘﺭﺎﺒﺘﺨﺍ ﻕﺭﻁ– ﺕﺍﺭﺎﻴﺴﻟﺍ ﻙﺭﺤﺘﻤﻟﺍﻡﺩﺎﺼﻟﺎﺒﺔﻴﻔﻠﺨﻟﺍﺔﻤﺩﺼﻟﺍ :ﻲﻨﺎﺜﻟﺍ ﺀﺯﺠﻟﺍ MOTOR VEHICLES METHODS OF TEST FOR IMPACT STRENGTH PART 2: MOVING BARRIER REAR IMPACT ICS:43.020 MOTOR VEHICLES METHODS OF TEST FOR IMPACT STRENGTH PART 2: MOVING BARRIER REAR IMPACT Date of GSO Board of Directors Approval : 25/ 10/ 1426 (27/11/2005) Issuing status : Technical Regulation GSO STANDARD GSO 37/2005 Foreword Standardization Organization for GCC (GSO) is a regional Organization which consists of the National Standards Bodies of GCC member States. One of GSO main functions is to issue Gulf Standards /Technical regulation through specialized technical committees (TCs). GSO through the technical program of committee TC No.2" Technical Committee of Mechanical standards " has updated the GSO Standard No. GSO 37/1994 " Motor Vehicles Methods Of Test for Impact Strength Part 2: Moving Barrier Rear Impact " . The Draft Standard has been prepared by Kingdom of Saudi Arabia This standard has been approved as Gulf Technical Regulation by GSO Board of Directors in its meeting No. 4 held on 25/10/1426 (27/11/2005) The approved standard will replace and supersede the standard No. ( GSO 37/2005). 1 GSO STANDARD GSO 37/2005 MOTOR VEHICLES METHODS OF TEST FOR IMPACT STRENGTH PART 2: MOVING BARRIER REAR IMPACT 1- SCOPE AN