国家标准《锆及锆合金管材涡流探伤方法》英文版（送审稿）.docxVIP

GB/T 34644-2017 PAGE 2 PAGE 1 Issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of ChinaImplementation date：2018-04-01 Issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of the People's Republic of China Implementation date：2018-04-01 Issue date：2017-09-29 Eddy current testing method for zirconium and zirconium alloy tube 锆及锆合金管材涡流检测方法 （English Translation） （送审稿） GB/T 34644-2017 National Standard of the People’s Republic of China ICS 77.040.20 H 26 PAGE 6 Foreword This standard is drafted in accordance with rules given in the GB/T 1.1-2009 This standard is proposed by China Nonferrous Metals Industry Association. This standard is administrated by National Technical Committee for Standardization of Non ferrous Metals Eddy current testing method for zirconium and zirconium alloy tube Scope This standard specifies the eddy current testing method for zirconium and zirconium alloy tube. This standard is applicable to testing of zirconium and zirconium alloy tube with outside diameter range from 5mm to 16mm. It is also recommended for the testing of other size of zirconium and zirconium alloy tube. Normative references The following documents are indispensable for the application of this document. For dated references only the edition cited applied. For undated references, the latest edition of referenced documents (including any amendments) applied. GB/T 9445, Non-destructive testing - Qualification and certification of NDT Personnel GB/T 30565, Non-destructive testing- Eddy current testing-General Principles Testing Principle Eddy current testing is the method of detecting the defects produced on or near the surface of conducting specimen by using the eddy current testing according to the principle of electromagnetic induction. Generally, the