FMEA评分细则参照表.docVIP

FMEA评分细则参照表 Severity 严重度 Rating 等级 Criteria 标准 Example 举例 10 Failure affects safe operation of vehicle or may endanger operator 影响车辆安全操作或危害操作者 Safety Hazard to customer or operator. 对顾客或操作者造成安全性危害 9 Failure involves non-compliance with Government Regulations 违反政府的有关法规 Emmissions (OBD II) item. Regulatory item. 排放项目 (OBD II)。法规项目 8 Failure causes customer high degree of dissatisfaction 失效将导致顾客严重不满意 Failure causes customer high degree of dissatisfaction 失效将导致顾客严重不满意 7 Failure causes customer dissatisfation. May result in disruption to Assembly Plant operation. 使顾客不满意。或影响整车厂装配 Dealer repair (noise, vibration, leaks, etc). Vehicle Assembly Plant return / pull or major spill. 销售商返修(噪声、振动、泄漏，等) 。整车厂紧急接动零件 或重大的缺陷 6 Major disruption to production line. 严重影响生产线 Defect caught at GMPT Final Test. Assembly Line heavy rework. 在GMPT 最终检验时发现缺陷。装配线大量返工 5 Minor disruption to production line. 轻微影响生产线 Defect caught at GMPT Final Test. Assembly Line. Light rework or scrap. 在GMPT最终检验时或装配线发现缺陷。装配线轻微返工或报废 4 Failure may cause inconvenience to subsuquent operation, minor repair. 给后续工位带来不便，轻微返修 Defect passes to next process. 缺陷流到下一工序 3 Failure may cause slight inconvenience to subsequent operation, minor repair. 给后续工位带来微小不便，轻微返修 Defect caught at subsequent operation (In-line). 缺陷在后续工序发现(在线) 2 Failure may cause slight inconvenience to operation, minor repair. 给本工位带来微小不便，轻微返修 Defect caught and corrected at operation (In-station). 缺陷在操作时被发现并纠正(在工位处) 1 Customer will probably not even notice. 顾客可能不会注意到 No effects. 没有影响 Detection 可探测度 Rating 等级 Criteria 标准 Suggested Range of Detection Methods 建议的 10 Absolute certainty of non-detection 肯定不可能检测出 Cannot detect or is not checked. 不能检测出或没有进行检测 9 Very-low - controls will probably not detected 很低- 控制方法可能检测不出 Indirect check only. 仅仅间接检测 8 Low - controls have poor chance of detection 低- 控制方法检测出的机率很低 Visual inspection. 目测 7 Low - controls have poor chance of detection 较低- 控制方法检测出的机率较低 Double visual inspection. 目测二次 6 Moderate - controls may de