NBSJ-089支座加工工艺编制及加工3-12.5mm槽的铣床专用夹具设计.doc

PAGE PAGE II PAGE PAGE I NBSJ-089支座加工工艺编制及加工3-12.5mm槽的铣床专用夹具设计 摘要 这次设计的主要内容是NBSJ-089支座加工工艺编制及加工3-12.5mm槽的铣床专用夹具设计，通过对任务书的解读，内容有加工工艺规程，专用铣床夹具。在掌握零件作用以及对其进行分析的基础上，完成了这2点设计内容。 设计之初通过资料的查阅了解和掌握机床夹具的相关知识，为后面的设计和计算提供保障。说明书里面的知识点主要有对机床夹具进行设计、公差等。首先搞清楚这个加工的零部件，然后对它进行了分析，这样就可以在加工的时候精确度更高，将零件的标准定下来，之后在算一下每一个步骤的切削用量的大小。在这还要特别关注的是，在对零部件进行定位的时候，必然会有偏差出现，这个偏差一定要在规定的范围里面，这样才可以对这个夹具的好处，坏处进行了解，对它进行改善。 通过上面的设计、分析和计算，圆满的完成了本次毕业设计的所有任务，在巩固之前所学知识的同时，还为今后的学习夯实基础。 关键词：NBSJ-089支座、加工工艺，3-12.5mm槽、夹具设计 Abstract The design of the main content is NBSJ-089 support processing technology preparation and processing 3-12.5mm slot milling machine special fixture design, through the task book interpretation, content processing process, special milling machine fixture. On the basis of mastering the function of parts and analyzing them, the 2 design contents are completed. At the beginning of the design, through the data access, understand and grasp the relevant knowledge of machine tool fixture, for the design and calculation to provide protection. Instructions inside the main knowledge of the machine tool fixture design, tolerances and so on. First make clear of the processing parts, and then analyzes it, so that it can be precision in the processing time is higher, the standard parts will settle down, after the count of cutting each step size. This also is of particular concern, in the positioning of the parts, there must be a deviation, the deviation must be in the specified range, so that it can be on the fixture of the benefits, disadvantages of understanding, to improve it. Through the above design, analysis and calculation, successfully completed all the tasks of the graduation project, in the consolidation of knowledge before, at the same time, but also for the future study of solid foundation. Keywords: NBSJ-089 support, processing technology, 3-12.5mm groove, fixture design 目 录TOC \o "1-3" \h \z \u 22827 摘要 I 21595 Abstract II 28500 第1章 引言 - 1 - 28472 第2章 计算生产纲领、生产效率