浮动球阀使用说明书.docx

SUNGO VALVES GROUP CO.丄TD 管线阀门 PIPELINE V ALVE 浮动球阀使用说明书 FLOATING BALL VALVE OPERATING INSTRUCTIONS 管线浮动球阀使用说明书 管线浮动球阀使用说明书 Pipeline Floating Ball Valve Operating Instruction 1、用途和性能规范：Purpose and Specification 本产品是我公司按API 6D/API 608设计、制造的钢制管线浮动球阀，适用于液体、气体等介 质，在管路上作启闭装置，具有密封结构可靠、先进，流阻小，启闭迅速、灵活，使用寿命长，安 全可靠，维修方便等优点，可广泛的用于石油、化工、炼制、钢铁、造纸、医药等行业。 This products is our compa ny accord ing to the API 6D/API 608 desig ns and manu factures of steel pipeline floating ball valve, It is used for liquid,gas etc tubing line open or mai n adva ntages in clude: Reliable seali ng structure 、Thech no logy adva need、Small liquid resista nee > Flexible ope n and close、Long service life 、Safe reliabe、Convienient maintance etc. This kind of ball valve is widely utilized in Petroleum、Chemical industry 、refinement 、 Steel and iron 、papermaking, medicine etc. 产品性能规范表 Performa nee Specificatio n 压 力等级 pressure level Class 300 (PN50) 公称压力Nominal MPa 1 D 壳体液压强度试验压力Shell test 阀座咼压密封试验压力 High-pressure closure 低压气密封试验压力 Low-pressure closure 适用介质 Suitable media 水、气、油品等非腐蚀性介质 Water,oil, steam, etc non-corrosive media 适用温度 Suitable temperature -29~100°C 2、采用的主要标准： The main adoption standard 设计制造与结构长度按 API 6D/API 608 的规定； Design conform to API 6D/API 608 法兰型式及尺寸按 ASME的规定；Flange conform to ASME 结构长度按 ASME的规定；Face to face conform to ASME 阀门的温度-压力额定值按 ASME的规定；Temperature-class conform to ASME 检验和试验按 API 6D的规定；Test conform to API 6D 防火标准按 API 607/6FA 的规定。Fire safe conform to API 607/6FA. 3、结构特点 ： Structure Characteristic 90 度回转，操作扭矩较低，便于实现自动控制。 90 degree rotary, Low operating torque, it is easy to realize automatic control. 全通径，流阻小，便于管线清扫。 Full port, small resistance to liquid, easy to clean the pipeline 阀杆头部的扁方结构提供了安装与管线平行的水平手柄，可防误安装，且容易识别阀门开或关的 状态。 Stem head's flat square structure has provided the installment and the pipeline parallel horizontal handle, can prevent wrong installation, and easy to distinguish the condition which the valves open or close. 阀杆下部设计一防飞出结构的整体式凸肩， 同时也具有上密封功能， 进一步确保了阀杆部位的密封。 Th