SD10-快速入门指南_图文.doc

SD10 操作指南 用户手册-入门指南 结合SD系列软件阅读参考 用户手册B版本对应控台4.0.680+ 地址:广州市番禺区沙头街禺山西路363号联邦工业城内 电话:020-******** 传真:020-******** 官网: SD10 操作指南 Copyright ? 2014 Digico UK Ltd All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of Digico UK Ltd. Information in this manual is subject to change without notice, and does not represent a commitment on the part of the vendor. Digico UK Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. All repair and service of the SD10 product should be undertaken by Digico UK Ltd or its authorised agents. Digico UK Ltd cannot accept any liability whatsoever for any loss or damage caused by service, maintenance, or repair by unauthorised personnel. Software License Notice Your license agreement with Digico UK Ltd, which is included with the SD10 product, specifies the permitted and prohibited uses of the product. Any unauthorised duplication or use of Digico UK Ltd software, in whole or in part, in print or in any other storage and retrieval system is prohibited. Licenses and Trademarks The SD10 logo and SD10 name are trademarks, and Digico UK Ltd and the Digico UK Ltd logo are registered trademarks of Digico UK Ltd. Microsoft is a registered trademark and Windows is a trademark of Microsoft Corp. Digico (UK Ltd Unit 10 Silverglade Business Park Leatherhead Road Chessington Surrey KT9 2QL England Telephone: +44 (01372 845600 Fax: +44 (01372 845656 Email: sales@ WWW: Manual Issue and Date: Issue B - April 2014 - For Version 4.0.680+ Software Licence Agreement "Product": SD10 software product produced by Digico UK Ltd intended for use on Target Platform identified below. "Target Platform": Digico SD10 Digital Console system. In return for the payment of the one-time fee, the Customer (identified at the end of this A