USCAR25电子连接器人体工学设计准则 (Rev 1) 2008.pdf

Electrical Connector Assembly Ergonomic Design Criteria SAE/USCAR-25 Revision 1 September 2008 ISBN: 978-0-7680-2102-8 SAE/USCAR-25 REVISION 1 Issued May 2003 Revised 2008-09 ELECTRICAL CONNECTOR ASSEMBLY ERGONOMIC DESIGN CRITERIA TABLE OF CONTENTS 1.0 SCOPE 2 2.0 REFERENCED DOCUMENTS 2 3.0 GENERAL2 4.0 DESIGN GUIDELINES – HAND-PLUG CONNECTORS 2 5.0 DESIGN GUIDELINES – MECHANICAL ASSIST CONNECTORS 8 6.0 DESIGN GUIDELINES – TWIST LOCK CONNECTORS 14 7.0 TESTING – HAND-PLUG AND MECHANICAL ASSIST CONNECTORS 15 8.0 DESIGN GUIDELINES – CPAs (CONNECTOR POSITION ASSURANCE) 16 9.0 HAND CLEARANCE GUIDELINES 17 APPENDIX A: GLOSSARY31 APPENDIX B: SURFACE AREA CALCULATIONS32 APPENDIX C: REFERENCES35 APPENDIX D: REVISIONS36 __________________________________________________________________________________________________________________________________________ The research data, analysis, conclusion, opinions and other contents of this document are solely the product of the authors. Neither the SAE International (SAE) nor the United States Council for Automotive Research (USCAR) certifies the compliance of any products with the requirements of nor makes any representations as to the accuracy of the contents of this document nor to its applicability for purpose. It is the sole responsibility of the user of this document to determine whether or not it is applica