利用MATLAB实现跳频通信系统.pptxVIP

利用MATLAB 实现跳频通信系统 摘要：随着无线通信不断快速的发展，跳频调制技术越来越受到人们的重视。跳频通信是 一种具有较强抗干扰能力的通信体制。其工作原理是指收发双方传输信号的载波频率按照 预定规律进行离散变化的通信方式，即通信中使用的载波频率受伪随机变化码的控制而随 机跳变。跳频技术是一种具有高抗干扰性、高抗截获得能力的扩频技术。由于它的技术优 势，跳频技术不仅在军事通信领域得到广泛的运用，在民用领域也有很好的表现。 本课题要求构建蓝牙跳频通信系统的??组成模块，包括信号传输，信号接收，谱分析 和误码分析部分，了解和熟悉蓝牙跳频系统的特点，分析系统的运行及性能。主要研究方 法是 MATLAB 软件进行蓝牙跳频通信系统的仿真，通过各组成模块的连接与封装，运行 并分析结果。 关键词：蓝牙，跳频，MATLAB，无线通信;Realize Frequency Hopping Communication System Based on MATLAB Abstract：With the rapid development of the wireless communications, people pay more and more attention to frequency hopping modulation techniques. Frequency hopping communication is a strong anti-interference communication system. The working principle is a communication mode which refers to the carrier frequency that sends and receives the signal according to rule to do dispersant change, that is applying the carrier frequency used in communication by pseudo-random code control and random changes hopping. Frequency hopping technology is a spread spectrum with high anti-interference and resistance ability. Frequency hopping technology not only being widely used in military communication areas, but also in civilian areas due to its technique advantages. This paper is to make up composed modules for the Bluetooth frequency hopping communication system, which including signal transmission, signal reception, spectral analysis and error analysis, as well as to know and have a deep understanding of the characteristics of this system, and also including analyzing the performance and its performance. The main research method is using matlab to make the simulation of the Bluetooth frequency hopping communication systems, run and analysis results by the simulation of each of the modules connection and encapsulation. Keywords: Bluetooth, frequency hopping, MATLAB, wireless communication;1;1;1;2;3;在定频通信系统中，载波频率和发射机主振荡器的振荡频率都是固定不变的。主振荡 器的频率必须根据控制指令而改变，只有这样才能得到跳频信号。跳频器是产生跳频信号 的装置。它由跳频指令发生器和频率合成器组成。信息在跳频通信系统可以以模拟或数字 的方式传输，通过调制器的调制可获得副载波恒定的已调波。已调