基于PROTEUS的STM32仿真设计.docxVIP

PAGE II 作者：大月亮 基于PROTEUS的STM32仿真设计 学生：× × ×，× × ×学院（系） 指导教师：× × ×，工作单位 摘要 现代科学技术的发展极大带动了产品自动化的发展，越来越多的单片机应用出现在我们的日常生活中，单片机的渗透使得传统的控制检测系统已经远远跟不上时代的步伐，且基于单片机的系统的精度和准确率也是传统检测系统所不能比拟的，另外基于单片机的检测系统一般都具备了体积微小功耗小等特点。 本设计是针对STM32单片机F103C6T8单片机的仿真设计，所以使用该单片机对水位检测系统进行仿真，需要实现的功能主要包括对水位的检测，当发现需要检测的水位过低时启动报警装置，通过使用定时中断、数据采集、数据显示等功能来实现需要展示的内容。对该系统进行拆分可以分为水位监测模块、LCD显示模块、按键模块、声光报警模块，通过软件的设计将几个模块连接起来进行协同工作。从而实现本系统水位检测系统的设计。 关键词 水位检测系统；STM32单片机；水位检测；声光报警  Simulation design of STM32 based on PROTEUS Abstract Development of modern science and technology has greatly spurred the development of automation products, a growing number of SCM application in our daily life, the penetration of MCU makes the traditional control detection system has far couldnt keep up with the pace of the era, and based on single chip microcomputer system of precision and accuracy are also cant be matched by traditional testing system, based on single chip microcomputer detecting system generally have low volume small power consumption, etc. This design is aimed at STM32 microcontroller F103C6T8 MCU simulation design, so using the single chip microcomputer simulation of water level detection system, the need to implement the function mainly includes the detection of water level, when found the need to detect the start alarm device, when the water level is too low, by using the timer interrupt, data acquisition, data display, and other functions to realize the need to display content. The system can be divided into water level monitoring module, LCD display module, keypad module and sound-light alarm module. Several modules are connected to work together through the design of software. Thus the design of the water level detection system is realized. Keyword Water level monitoring system; STM32 MCU; Water level detection; Sound and light alarm 目录 TOC \o 1-3 \h \z \u 1 绪论 1 1.1 应用实例背景 1 1.2 应用实例目的及意义 1 1.3 国内外研究现状与发展趋势 1 1.4 系统设计主要任务 2 2 方案论证 3 2.1 总体设计方案 3 2.2 主控模块选型 3 2.2.1 51单片机 3