floefd学习教程efd案例软件lecture the wizard.pptxVIP

Lecture 2 The WizardWizard and NavigatorThe Wizard allows you to create a new project in a step-by-step process.Navigator allows you direct access to dialog boxes found in the wizard.Step 1: Project ConfigurationStep 2: Unit SystemStep 3: Analysis TypeAnalysis TypeInternal flow analysis are for flows bounded by outer solid surfaces. e.g., flows inside enclosures, HVAC systems, etc..External flow analysis are for unbounded flows. In this case the solid model is fully surrounded by the flow. e.g., flows around enclosures, automobiles, buildings, etc. If you want to analyze both internal and external flows simultaneously, use External analysis.e.g. flows over and through an enclosureConsider closed cavities For models that have internal spaces not involved in the flow analysis, you can use two additional options for reducing the simulation time: Exclude cavities without flow conditions. In both Internal and External flow analyses select this option to disregard closed internal spaces with no Boundary Conditions or Fans specified on their surfaces. Exclude internal spaces. Allows us to disregard closed internal spaces in External flow analysis.Internal cavityCavity without flow conditionPhysical FeaturesHeat conduction in solidsRadiationTime-dependentSpecify the physical analysis timeSpecify the output time step of resultsGravityRotationStep 4A: Default FluidStep 4B: Default SolidStep 5: Default Wall ConditionsDefault outer wall thermal conditions:Adiabatic wallHeat transfer coefficientHeat fluxWall temperatureStep 6: Initial Ambient ConditionsUnder Parameter Definition select whether you want to manually specify initial (ambient) conditions or apply another project’s results as initial (ambient) conditions for the current project:Select User Defined for manual specification.Select Transferred for using results from another calculation.Step 7: Results and Geometry ResolutionResult Resolution governs: the solution accuracy through mesh settings.a higher level produces m