涡流粉碎机说明书汇总.docVIP

涡流粉碎机说明书汇总 涡流粉碎机说明书汇总 PAGE / NUMPAGES 涡流粉碎机说明书汇总 SF-520 涡流粉碎机组 SF-520 Vortex grinder sets 使 用 说 明 Operation instruction 天津茂源制药机械有限公司 Tianjin Maoyuan Pharmaceutical Machine Co., Ltd. 一、概况 One. Brief introduction 我厂生产的 SF-520 涡流粉碎机组是消化吸收了国外先进技术 ,结合实际情况研制 成功的一种涡流式粉碎机，该机具有粒度小、温度低等特点。机组有粉碎主机， 微粉收集器，布袋收集器，输送管道，电器控制柜及离心风机组成。物料在主机 内部停留时间短。可防止过度粉碎及温度升高。粉碎后，粉碎机在负压作用下， 进入收集器，经排料阀排出。该机组具有技术性能稳定、噪音低、耗电省、生产 率高、造型美观等优点。是食品、医药、化工、涂料、农药等行业理想的微细粉 碎设备。 The SF-520 vortex grinder sets manufactured by our company has digested and absorbed the advanced technology from both at home and abroad, in combination with the practical situation, a kind of vortex type crusher has been developed successfully, the set has the characteristic f small granularity, low temperature. The set is composed of grinding mainframe, micropowder collector, bag collector, transfer piping, electrical control cabinet and centrifugal blower. The materials stay inside the mainframe for shorter period of time. It can prevent the overgrinding and temperature increase. After the grinding, under the role of negative pressure, the grinder enters the collector, and get discharged from the blow-off valve. The set has the advantagesof stable technical performance, low noise, low power consumption, high production efficiency, attractive appearance etc. It is an ideal micro-fine grinding equipment in food, pharmaceutical, chemical industry, coating, pesticide etc. of industries. 二、工作原理 Two. Working principle 在传统的敲击与研磨粉碎过程中，难以克服的是物料发热发粘和变性等现象， 本机采用了涡流的高速旋转运动，在粉碎室内产生了强力的气流。物料由进料口 在负压下被吸入粉碎室。 在叶片与模块间强大的气流产生的涡流震动击碎经冲击， 剪切，研磨。由气流将粉碎室热量带走，所以粉碎过程中产生的热量不会积聚升 温。成品细粉从筛网流出，提高生产效率、粉碎细度可由筛网的目数调节，成品 细度均匀稳定。 In the process of traditional knocking and grinding pulverization, it is hard to overcome the phenomenon of materials heating, pastiness and degeneration etc.. The set has adopted the vortex type high speed rotational motion, the powerful airflow is produced inside the grinding chamber. The materials are absorbed into the grinding chamber