RS Components 其他网络设备 电机驱动芯片 BD6W211F-E2 使用说明.pdfVIP

Datasheet DC Brush Motor Drivers (7V Max) BD621xxx Series General Description Key Specifications These H-bridge drivers are full bridge drivers for brush ■ Operating Supply Voltage: 7V(Max) motor applications. Each IC can operate at a power ■ Maximum Output Current: 0.5A / 1.0A / 2.0A supply voltage range of 3.0V to 5.5V, with output currents ■ Output ON-Resistance: 1.0Ω / 1.0Ω / 0.5Ω of up to 2A. MOS transistors in the output stage allow ■ PWM Input Frequency Range: 20kHz to 100kHz PWM speed control. The integrated VREF voltage control ■ Standby Current: 0μA (Typ) function allows direct replacement of discontinued motor ■ Operating Temperature Range: -40°C to +85°C driver ICs. These highly efficient H-bridge driver ICs facilitate low-power consumption design. Packages W(Typ) x D(Typ) x H(Max) SOP8 5.00mm x 6.20mm x 1.71mm Features HSOP25 13.60mm x 7.80mm x 2.11mm  Built-in one channel configuration HRP7 9.395mm x 10.540mm x 2.005mm  VREF Voltage Setting Pin Enables PWM Duty Control  Cross-Conduction Prevention Circuit  Four Protection Circuits Provided: OCP, OVP, TSD and UVLO Applications VTR; CD/DVD players; audio-visual equipment; optical disc drives; PC peripherals; OA equipments HRP7 (Pd=1.6