ANSYS云图显示的最大应力与列表显示的不一样.pdfVIP

ANSYS 云图显示的最大应力与列表显示的不一样 在 GUI 方式下，需要关闭 PowerGraph 选项，云图才能与 *get 或 List 的结 果一致。如果打开 PowerGraph 选项，得到的是表面单元的节点平均值，故不准确。 以下是ansys 的PowerGraphics 的帮助 PowerGraphics 的特性(Characteristics of PowerGraphics) , Displays for large models are plotted at a much greater speed than with the Full Model method. , PowerGraphics plots quadratic (curved) surfaces for midside node elements. , This method can display discontinuous results due to material type and real constant discontinuities. , Shell element results are displayed at both top and bottom layers, simultaneously. , You can use the Query picking option to query subgrid results for some elements in the Graphical User Interface. , PowerGraphics is not available for circuit elements. , When requested results data are not supported by PowerGraphics, the results are output usin the Full Model method. , Results averaging occurs using only the data at the model surface. , Minimum and maximum values are valid only for data at the model surface. , PowerGraphics supports only the results coordinate system for plotting results data. (The elements-based coordinate system is not supported.) 何时使用 PowerGraph,(When to Use PowerGraphics) Using the PowerGraphics display method has distinct advantages, since graphics displays are plotted at a much faster rate of speed than with the Full Model method. In addition, PowerGraphics produces more realistic results at material type and real constant discontinuities in the model. 1 和 full model 相比，显示速度快; 2 在模型的材料类型和实常数不连续时，得到更加真实的结果。 从 PowerGraphics Plot 中能得到什么结果,(What to Expect from a PowerGraphics Plot) Since PowerGraphics plots or listings are given for the exterior surface of the model, you can expect to see differences in these results, compared to those given when using the Full Model method. The averaging calculations for PowerGraphics include results for only th