APQP状态报告程序概述.pptVIP

Module Introduction组成部分介绍 Prototype Build 样件制造 1-38 第六十一页，共一百零三页。 Process Flow过程流程 Feedback Assessment Corrective Action 反馈、评估和纠正措施 Product Process Validation 产品与过程确认 Process Design Devel opment 过程设计和开发 Product Design Development 产品设计和开发 Prototype Build 样件制造 Plan Define 计划与定义 1-39 第六十二页，共一百零三页。 Prototype Build Overview样件制造概述 APQP Prototype Build elements support the successful planning and construction of Prototype Build units, which provide an understanding of the vehicles: APQP 样件制造要素支持样件制造单位的成功的策划和构造，提供对于车辆的如下理解： Design 设计 Functionality 功能性 Manufacturability 可制造性 1-40 第六十三页，共一百零三页。 Prototype Build Elements样件制造要素 The PBCP supports the planning and construction of prototypes by documenting the process steps of the Prototype Build phase. PBCP 通过将样件制造阶段的过程步骤文件化支持样件的策划和构造。 The Prototype Build ensures that the customer receives CPs manufactured and assembled prior to 1PP. 样件制造确保顾客在 1PP 前收到制造和装配好的 CP。 1-41 第六十四页，共一百零三页。 PBCP (Prototype Build Control Plan) DefinitionPBCP（样件制造控制计划）定义 The PBCP description of the dimensional measurements and material/functional tests that occur during the CP build. PBCP 描述了发生在 CP 制造中的尺寸测量和材料/功能试验 It is the first summary document that indicates: 是说明如下事项的摘要文件： The steps between Prototype Build and Pre-Launch leading to the Production Control Plan 产生生产控制计划的样件制造和试生产之间的步骤 The process steps to identify and align both the products characteristics and its targets 识别和调整产品特性及其指标的过程步骤 1-42 第六十五页，共一百零三页。 PBCP General ExpectationsPBCP 总的期望 Product characteristics are reviewed 评审产品特性 Those characteristics required for PBCPs are identified. 确定 PBCP 所要求的特性。 All potential significant and critical characteristics from the DFMEAs must be included. 必须包括 DFMEA 输出的所有潜在重要和关键特性。 The process parameter conditions must be documented. 过程参数条件必须被文件化。 This includes all special tooling, manufacturing, and assembly conditions. 包括所有特殊工具、制造和装配条件。 1-43 第六十六页，共一百零三页。 Prototype Build样件制造 Defines the manufacture and assembly of components, subsystems