Agilent C1 – C3 Hydrocarbon Analysis Using the Agilent 490 Micro GC – Separation Characteristics for PoraPLOT U and PoraPLOT Q Column Channels 说明书用户手册.PDF

C1 – C3 Hydrocarbon Analysis Using the Agilent 490 Micro GC – Separation Characteristics for PoraPLOT U and PoraPLOT Q Column Channels Application Note Micro Gas Chromatography, Hydrocarbon analysis Author Remko van Loon Agilent Technologies, Inc. Middelburg The Netherlands Introduction This application note shows the possibilities and limitations in fast analysis of saturated and unsaturated C1 to C3 hydrocarbons using an Agilent 490 Micro GC. The chromatograms and results outline the similarities and differences when using a PoraPLOT U and a PoraPLOT Q column channels. Both the PoraPLOT U and the PoraPLOT Q are capable of resolving methane from the composite air peak and sep- arate CO2 from methane and the C2 hydrocarbons. The PoraPLOT U column channel will have the following separation characteristics: • Baseline separation for ethane, ethylene and acetylene • Coelution of propane and propylene The separation characteristics for the PoraPLOT Q column channel are: • Coelution of ethylene and acetylene • Baseline separation for propane and propylene If you want to the ability to measure anywhere and get the