EMERSON艾默生 Manual Liquid Density Meter Standard and Advanced Electronics - Model 7835, 7845, 7846, 7847 Micro Motion说明书用户手册.pdf

® Technical Manual Micro Motion US, Rev. D December 2008 7835/7845/7846/7847 7835/7845/7846/7847 Liquid Density Meter Standard and Advanced Electronics Contents 7835/45/46/47 Technical Manual Copyright 200 ® Micro Motion pursues a policy of continuous development and product improvement. The specification in this document may therefore be changed without notice. To the best of our knowledge, the information contained in this document is ® accurate and Micro Motion cannot be held responsible for any errors, omissions or other misinformation contained herein. ® No part of this document may be photocopied or reproduced without prior written consent of Micro Motion . Cont-2 7835/45/46/47 Technical Manual Contents IMPORTANT NOTICE DO NOT drop the meter. Handle with care. DO NOT use liquids incompatible with the MATERIALS OF CONSTRUCTIONS. DO NOT position RUPTURE DISC where failure could cause personal injury. DO NOT allow axial loading from PIPEWORK STRESSES to exceed ½ TONNE. DO NOT operate the meter above its RATED PRESSURE. DO NOT PRESSURE TEST above the specified TEST PRESSURE. DO NOT expose the meter to excessive vibration (of 0.5g continuous). ENSURE all ELECTRICAL SAFETY requirements are applied. ENSURE meter and associated pipework are PRESSURE TESTED to 1½ times the maximum operating pressure after installation. ENSURE meter is not TRANSPORTED when it contains hazardous fluids. This in