Dell戴尔VNX Replicator Failback Plug-in for VMware vCenter Site Recovery Manager 4.0.11 ReadMe First说明书用户手册.pdf

Read Me First ® EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager Documentation The EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager Read Me First lists the components of the EMC® VNX Failback Plug-in for VMware vCenter Site Recovery Manager (SRM) solution and troubleshooting information. The EMC VNX Failback Plug-in for VMware vCen- ter Site Recovery Manager Release Notes contain additional implementation details for the EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager. Contents of the EMC VNX Failback Plug-in for VMware vCenter SRM solution • EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager Read Me First (P/N 300-008-784) • EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager Release Notes (P/N 300-008-785) • EMC VNX Failback Plug-in for VMware vCenter Site Recovery Manager.zip (P/N 453-003-209) Minimum System Requirements The VMware infrastructure at the protected (primary) and recovery (secondary) sites must meet the following requirements: • vCenter Server 4.0 or later • VI Client • Site Recovery Manager Server with the following installed: • Site Recovery Manager 4.0 or later ™ • EMC VNX Replicator Adapter 4.0 or later available on the VMware website. This server must be a 32-bit vCenter Server or a separate 32-bit Windows host with at least one ESX(i) version 3.5 or later host connected to a VNX storage system. Installing the EMC VNX Failback Plug-in for VMware vCenter SRM The VNX Failback Plug-in for VMware vCenter SRM is distributed as a Zip file containing a single-file installer. After you download the Zip file from EMC Powerlink®, the Failback Plug-in software is available for installation. If you have trouble with your EMC VNX Failback Plug-in for VMware Center SRM If you are unable to r