ANSYS Mechanical 2022R1 前处理新功能介绍.pdf

ANSYS 2022R1结构前处理新功能介绍 出品 | Rigid Transformations on External Data • 从上游外部数据系统导入的数据支持Mechanical内部的平移变 换 • 如果用户分析的几何没和外部导入数据在同一坐标系下，通过 该功能可对导入数据进行位置调整映射到几何上 • 用于定义转换的两个选项:  使用原点和欧拉角  使用坐标系 2 出品 | Contact Shell Element Scoping • 使用Mechanical APDL 求解器时， “接触区域”的接触侧和目标侧都支持 3D Shell Element (原先版本只能通 过face 或者Element face) 此范围界定功能同时支持Geometry 和Named Selection 范围界定方法 • 限于shell分析，非线性接触需要定义top和bot面 3 出品 | Beam to Beam Model for Contacts • 在检测到Beam-to-Beam接触时显示此属性. • 基于梁模型状态 ，能够指定应用程序Beam-to-Beam接 触设置 • Beam-Beam Model: - Exclude Crossing Beams: 排除任何相互交叉的Beam的接 触. - Only Crossing Beams: 仅包括彼此交叉的梁的接触 - All (Default): 包括所有梁接触方案 ，包括：梁/边to表面接 触、平行Beam-to-Beam接触和交叉Beam-to-Beam接触 4 出品 | CONTA177 KEYOPT • KEYOPT(3) • Exclude Crossing Beams: For this option, the application excludes the contact for any beams that cross one another. The Mechanical APDL Reference for this option is KEYOPT(3) = 1. • Only Crossing Beams: For this option, the application includes only the contact for beams that cross one another. The Mechanical APDL Reference for this option is KEYOPT(3) = 3. • All (default): This is the default setting. The application includes all beam contact scenarios, which are: beam/edge to surface contact, parallel beam-to-beam contact, and crossing beam-to-beam contact. The Mechanical APDL Reference for this option is KEYOPT(3) = 2. • KEYOPT(14) • allows each contact detection point to interact with multiple target segments simultaneously: • KEYOPT(14) = 0: each contact detection point c