ABB Emergi-lite 230W DIM LTC Addressable Interface remote Box - ELD9500.048FRW C-LTC230HFRW 数据表(英语)说明书用户手册.pdf

— PRODUCT SPECIFICATION 230W DIM LTC Addressable Interface Remote Box ELD9500.048FRW (Supplied as a kit) C-LTC230HFRW (Conversion by Emergi-lite) The LTC (Lamp Test Controller) interface is fully addressable and programable specifically to luminaires when working from an EMEX Test static inverter system. This is done in situ from the central PC. The LTC interface is required when connecting standard mains luminaire to the MXC substation. The 230W LTC interface is part of the EMEX MXC automatic emergency lighting testing system which can control the lamp and dimmer signal when testing. It measures the lamp power consumption and com- municates this and the lamp status back to the EMEX central PC using power line communication via the MXC substation. Specification Electrical Mains supply voltage: 220/230 AC 50/60Hz Mains supply current: 11.5mA (maximum) Nominal power: 2.65 watts Local monitoring input: 2 control inputs configurable as local switched and unswitched monitoring Relay type: 2 pole relay Relay voltage rating: 220/230 volts Relay current rating: 1A (max) AC Dimmer relay: Analogue / digital dimmer signal (28v max) Construction Enclosure: Galvanised Steel