Danfoss丹佛斯KK16601 Electrical Displacement Control Installation Kit (for Series 42 Variable Pumps) Installation Guide 安装指南.pdf

Unit Specification KK16601 EDC Installation Kit For Series 42 3500 Annapolis Lane North, Minneapolis, MN 55447 Telephone: (763) 509-2084 Telefax: (763) 559-0108 ISSUE: 1 DATE: April 1995 GENERAL DESCRIPTION This installation kit provides the necessary hardware when installing the Electrical Displacement Control (EDC) onto a Sauer- Danfoss Series 42 PV. This installation kit includes a gasket (Part Number 4800252), four Torx head bolts (m6x50) (Part Number 5000003), and three Torx head bolts (m6x60) (Part Number 5000004). GASKET ORIFICES KK16601, Gasket Part Number 4800252 is configured with the gasket) allowing pump full to full response time to be two 1.0 mm (0.039 inch) orifices (orifices are machined into approximately 1 - 2 seconds at 200 psid charge pressure. 1862 OPTIONAL GASKETS KK16602, Gasket Part Number 4800467 is configured with KK16603, Gasket Part Number 4800254 is configured with two 0.80 mm (0.031 inch) orifices allowing pump full to full four 1.60 mm (0.063 inch) orifices allowing pump full to full response time to be approximately 2 - 4 seconds at 200 psid response time to be approximately 0.6 - 1.0 seconds at 200 charge pressure. psid charge pressure. K18201 UNIT SPEC © Copyright 2000, Sauer-Danfoss (US) Company. 1 OF 2 All rights reserved. Contents subject to change. MOUNTING 1234567890123456789012345678901