ControlWave系统openBSI培训学习课件.pptVIP

Bristol BabcockBristol Babcock 软 件 培 训OPENBSI--------LocalView第一页，共十二页。1 Run LocalView第二页，共十二页。2 LocalView 初始画面第三页，共十二页。3 LocalView-----MODELocalView is a Windows? based tool which operates in three distinct modes, eachof which is described, below. LocalView allows the user to: Local Mode. Establish communications (via BSAP) with a locally attached Network 3000-series controller or ControlWave process automation controller to allow access byOpen BSI tools (DataView, Downloader, etc.)Flash Mode Perform a download of system firmware into the locally connected Network This option is used for field upgrades of system firmware.Configure Mode Configure IP addresses, and port parameters for a locally connected 386EX Protected Mode controller, a ControlWave controller, or a ControlWaveLP controller. IP Comm Mode:Establish communications (via IP) with a locally attached Network 3000-series controller or ControlWave process automation controller to allow access by Open BSI tools (DataView, Downloader, etc.)第四页，共十二页。4 PC的通讯端口PC端口通讯速率，必须与RTU速率一致RTS/CTS选择第五页，共十二页。5 就地控制器地址控制器类型选择No控制器程序文件第六页，共十二页。6 第七页，共十二页。7 LOCAL VIEW第八页，共十二页。8 Flash Mode第九页，共十二页。9 Configure Mode第十页，共十二页。10 IP Comm Mode第十一页，共十二页。11 内容总结Bristol Babcock。软 件 培 训。LocalView 初始画面。LocalView is a Windows? based tool which operates in three distinct modes, each。of which is described, below. LocalView allows the user to:。Flash Mode Perform a download of system firmware into the locally connected Network。IP Comm Mode。11第十二页，共十二页。