再生玻璃纤维混凝土耐磨性能研究.pdfVIP

试验研究 Experimental Research 再生玻璃纤维混凝土耐磨性能研究 1 1 2 2 彭龙贵 　程焕全 　陆鹏举 　丁　飞 1. 西安科技大学 材料科学与工程学院 陕西 西安 710055 2. 中煤矿山建设集团有限责任公司 安徽 合肥 230088 摘 要：在混凝土中等梯度加入玻璃纤维,对比分析了不同比例的再生玻璃纤维混凝土在抗压强度和耐磨性能方面 的差异，同时采用电子扫描显微镜（SEM）研究了再生玻璃纤维混凝土在耐磨强度试验之后的微观形貌，以验证再 生玻璃纤维对提高混凝土力学性能和耐磨性能的影响。结果表明：再生玻璃纤维对混凝土的抗压强度、耐磨性能 均有明显提升。随着掺量的增加，再生玻璃纤维混凝土的抗压强度和耐磨性能呈现先增加后降低的趋势，玻璃纤 维的最佳掺量范围为4～6kg/m 。3 关键词：混凝土；再生玻璃纤维；抗压强度；耐磨性能 Study on Abrasion Resistance of Recycled Glass-fiber Concrete Abstract: The purpose of this study is to verify the effect of recycled glass-fiber on improving the mechanical properties and abrasion resistance of concrete. Therefore, a moderate gradient of glass-fibers is added to the concrete for testing, and the differences in compressive strength and abrasion resistance of the recycled glass-fiber concrete with different proportions are compared and analyzed, while the microscopic morphology of the recycled glass-fiber concrete after the abrasion strength test is investigated using scanning electron microscopy (SEM). The results show that the recycled glass-fiber significantly improve the compressive strength and abrasion resistance of the concrete. The compressive strength and abrasion resistance of recycled glass-fiber concrete show a trend of increasing first and then decreasing with the increase of admixture amount, and finally the optimal admixture amount of glass-fiber 3 is concluded to be in the range of 4 6 kg/m . ～ Key words: Concrete; recycled glass-fiber; compressive strength; abrasion resistance 题，对混凝土材料的应用有一定的促进作用，符合我国目 引言 [3-4]