复合材料缠绕压力容器充压过程的热力分析的中期报告.docxVIP

复合材料缠绕压力容器充压过程的热力分析的中期报告 Abstract This interim report presents the progress made on the thermal analysis of the pressurization process of a composite wrapped pressure vessel. The report outlines the objectives, literature review, methodology, and preliminary results of the study. Objectives The objective of this study is to investigate the thermal behavior of a composite wrapped pressure vessel during the pressurization process. The primary focus will be on the temperature change of the composite material and the thermal stress induced by the pressurization process. Literature Review The use of composite materials for high-pressure vessels has become increasingly popular due to their high strength-to-weight ratio and corrosion resistance. The composite material consists of two or more materials that are combined to produce a material with superior properties. However, the thermal behavior of these composite materials during the pressurization process is not well understood. Methodology The study will use numerical simulations to model the thermal behavior of a composite wrapped pressure vessel during the pressurization process. The finite element method (FEM) will be used to simulate the temperature and thermal stress distribution within the composite material. The pressure vessel will be modeled using Abaqus software. Preliminary Results Preliminary results show that the temperature of the composite material increases significantly during the pressurization process. This increase in temperature is due to the compression of the composite material and the release of stored energy. Additionally, the thermal stress in the composite material increases as the pressure inside the vessel increases. Conclusion This interim report presents the progress made on the thermal analysis of a composite wrapped pressure vessel during the pressurization process. The study aims to investigate the thermal behavior of the composite material and the induced thermal stress during the