蝶形钢包回转台设计说明书.doc

摘 要 这次设计的题目是蝶形钢包回转台，蝶形钢包回转台是是属于双臂整体旋转单独升降试，它是目前回转台最为先进的一种形式，钢包回转台是现在连续铸造和炼钢过程中最普遍的运载和承托钢包进行浇注的设备，通常设置与钢水接受与浇注跨柱列之间。所设计的钢包回转半径，使得浇钢包水口处于中间包上面的规定位置。用钢水接受跨一侧的吊车将钢包放在旋转台上，通过回转台回转，使钢包停在中间包上供给其钢水。浇注的空包则通过回转台回转。在运回钢水接收跨，在设计钢包回转台的过程中，主要包括正常态体和事故状态下钢包回转台传动方案的设计，回转台结构尺寸的确定，主要零件的选择、计算与校核；电动机、减速器、气动马达、液压缸的选择与计算，以及钢包升降装置、锁紧装置、称重装置、加盖装置的设计，此外，还介绍部分主要零件具体的安装、维修、润滑、操作方法。 关键词：蝶形钢包回转台；连续铸造；炼钢；液压系统； Abstract The topic design warps to trun round the set to belond to a pair of armses whole revole alone rise and fall type, it turns round the pededtal currently most for the forerunner's a kind of from .The steel wraps to turns round the set to cast and make steel the that sprinkles to note most commonly in the application,The subject of this design is a butterfly ladle turret, butterfly ladle turret, are the arms raised or lowered independently of the overall rotation test, which is currently the most advanced form of a turret, ladle turret, continuous casting and steelprocess, the most popular carry and support the ladle pouring equipment, usually set to accept with the molten steel and pouring between the columns of the cross-column. The radius of gyration of the design of the ladle, pouring ladle outlet in the tundish above specified location. Accepted across the side of the crane using the molten steel ladle on the rotating stage, turret rotation, and supply its molten steel ladle stopped in the middle of the package. Pouring the empty package through the turret rotation. In the transport back to the molten steel to receive cross, in the process of design of steel package rotary Taiwan's, mainly including the normal state of body and accident state, ladle rotary units drive program design rotary Taiwan structural dimensions of the OK main parts of the selection, calculation and check; motor, speed reducer, motor, and the selection and calculation of the hydraulic cylinder, and ladle lifting devices, locking device, weighing device, stamped with the device design, in addition, also