《基于AMESim的压力控制插装阀仿真模型的建立及其动力学特性数值模拟》.pdf

《基于AMESim的压力控制插装阀仿真模型的建立及其动力学特性数值模拟》.pdf

  1. 1、本文档共13页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
《基于AMESim的压力控制插装阀仿真模型的建立及其动力学特性数值模拟》.pdf

The Simulation Model and Dynamic Performance for Pressure Control Cartridge Valve Based on AMESim WANG Qiao-yi,HUANG Hai-jun,GUO Shan,GONG Zhong-liang (1. School of Mechanical Engineering,Hangzhou Dianzi University,Hangzhou 310018,China) Abstract: Based on the structure of cartridge valve and the continuity equation of fluid, the mathematic model of cartridge valve was established. In addition, the simulation model of cartridge valve was built based on AMESim. After analyzing, several parameters related to pressure steady-state performance were selected to study on. The effects of the spring in main spool, the front cavity of main valve, the spring in pilot valve and the damping to pressure dynamic performance were analyzed. By the simulation study, master the steady-state and dynamic performance of pressure control cartridge valve comprehensively and systematicly:as spring stiffness decrease,steady pressure regulation deviation of poppet decrease;spring pretightening force only has an effect on open press,has no effect on steady pressure regulation deviation;as spool diameter increase, steady pressure regulation deviation of poppet decrease;poppet spring stiffness and pilot valve spring stiffness has no effect on the pressure dynamic performance.Using these simulation results, predict the characteristic of cartridge valve during the period of system design, to improve design efficiency and assure design quality. Key words: pressure control ;two-way cartridge valve;dynamic performance; mathematic model;dynamic simulation 基于AMESim 的压力控制插装阀仿真模型的建立及其动 力学特性数值模拟(包装装备及工艺) 王桥医,黄海军,过山,龚中良 (1.杭州电子科技大学 机械工程学院,浙江 杭州,310018 ) 【摘要】根据压力

文档评论(0)

wgvi + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档