《Battery Charger》.pdf

Highly Integrated Single-Cell Li-ion/Li-Polymer ® Battery Charger Application Note May 5, 2009 AN1049.1 Introduction The other end of the thermistor is expected to be connected to the ground of the battery pack. The ISL6291 is a highly integrated single-cell Li-ion/Li-polymer battery charger designed for handheld DIP Switch devices. The ISL6291EVAL1 provides a convenient platform A 9-bit DIP switch is located on the bottom edge of the to evaluate the integrated charger. This application note first board. This DIP switch allows users to set up various describes the components on this board so a user can TIMEOUT lengths, charger current levels, end-of-charge perform their own evaluation. Then it presents the current, and to simulate battery removal, and so on. The evaluations that can be carried out with this board. At the function of each bit is summarized in Table 1. end of this application note are the schematics, the layout of each layer, and the bill-of-materials. TABLE 1. DIP SWITCH FUNCTIONALITY BIT NAME WHEN OFF WHEN ON Board Description 1 TIMEOUT