APRS_BH4TDV译中文2.doc

PIC-et Radio II: How to Receive AX.25 UI Frames Using Inexpensive PIC Microcontrollers pic-et无线电二:如何收到ax。25用户界面框架使用便宜的照片微控制器 by John A. Hansen, W2FS State University of New York 49 Maple Avenue Fredonia, NY 14063 hansen@ 被约翰一个。汉森，w2fs纽约州立大学49枫树大街弗里多尼亚，纽约14063汉森@ Abstract: This paper provides step by step documentation of how to decode AX.25 UI frames using inexpensive PIC microcontrollers. It is designed primarily for those who wish to receive packet radio UI beacons from point to multipoint communications. The article assumes some knowledge of programming concepts and PIC microcontrollers. 摘要:这篇论文提供逐步如何的文件解码ax。25用户界面框架使用便宜的照片微控制器。它被计划主要地为那些谁希望收到分组无线用户界面指路明灯从点对多点沟通。文章假设一些编程概念的知识，照片微控制器。 Keywords: AX.25, UI Frames, PIC Microcontrollers 关键词:ax。25，用户界面框架，照片微控制器 Introduction 介绍 At the 1998 ARRL/TAPR Digital Communications Conference I presented a paper describing how to encode AX.25 frames using a PIC microcontroller so those frames could be transmitted via Amateur Radio. However, having learned to transmit packet using cheap chips, it was only natural that people would want to know how to receive packet frames as well. 在1998线电中继联盟/tapr数字交流会我提交文件描述如何编码ax。25次帧使用一个照片微控制器所以那些框架可以被发送通过业余无线电。然而，有学习传送分组使用廉价的芯片，它只自然那个人将想知道如何收到包框架由于好。 The first effort made in this direction that I know of was some assembler code developed by Byon Garrabrant, N6BG. A number of packet receive routines (by Byon and others) are currently available on the TAPR PICSIG software FTP site (/picsig/software). The purpose of this paper is to explain the basics of how PIC-based packet receive firmware works. 第一努力使在这个方向那我知道是一些汇编代码开发由含宝石的黄褐色土garrabrant，n6bg。许多包收到例行(由含宝石的黄褐色土等等)目前可用的在taprpicsig软件传输文件现场(/picsig/软件)。目的的这篇论文说明如何的基本点pic-based包收到固件工作。 Note that this paper will not provide you with a working packet receive system. If that is what you are seeking, simply use the code provided on the TAPR FTP site. Instead, my purpose is to describe the theory behind how PIC based packet receive routi