- 16
- 0
- 约2.23万字
- 约 10页
- 2017-09-20 发布于河南
- 举报
Journal of Medical Systems, Vol. 24, No. 2, 2000
Remote Control of Microcontroller-Based Infant
Stimulating System
1 1
˙
Mustafa Burunkaya and Inan Guler
¨
In this paper, a remote-controlled and microcontroller-based cradle is designed and
constructed. This system is also called Remote Control of Microcontroller-Based
Infant Stimulation System or the RECOMBIS System. Cradle is an infant stimulating
system that provides relaxation and sleeping for the baby. RECOMBIS system is
designed for healthy full-term newborns to provide safe infant care and provide
relaxation and sleeping for the baby. A microcontroller-based electronic circuit was
designed and implemented for RECOMBIS system. Electromagnets were controlled
by 8-bit PIC16F84 microcontroller, which is programmed using MPASM package.
The system works by entering preset values from the keyboard, or pulse code modu-
lated radio frequency remote control system. The control of the system and the motion
range were tested. The test results showed that the system provided a good perfor-
mance.
KEY WORDS: microcontroller; control; remote control; cradle; infant stimulating system.
INTRODUCTION
Crying in infancy is the most frequent complaint from parents to physicians.
It is also a symptom of distress and activation of physiologic stress responses from
infants.(1) Constant or frequent carrying, rocking, and swaddling of the baby may
be the most effective method of controlling crying.(2) But it is not possible for many
parents and not reasonable for others. Using a cradle, it is possible to solve this
problem. Rocking of the baby was incorporated into a cradle to provide relaxation
and sleeping for the baby when the mother was not there. The movement of the
cradle represents
原创力文档

文档评论(0)