机房群控系统设计.docVIP

专科毕业设计（论文） 设计题目： 基于S7-300的机房群控系统设计 系 部： 电 气 工 程 系 专 业： 电 气 自 动 化（工 业 企 业 方 向） 班 级： 工 企 0 9 1 3 0 1 姓 名： 马 丽 平 学 号： 093905130125 指导教师： 季 明 丽 职 称： 副 教 授 20 12 年6月 南京 摘 要 冷热源在空调系统中一方面它是系统的心脏另一方面，它的能耗也是构成系统总能耗的主要部分。因此对空调系统冷热源的关系着整个空调系统设计的优劣，也关系到业主在使用过程中的费用。保证冷水机组蒸发器水流量高于最小允许流量以上运行 Abstract Cold and heat source system in the central air conditioning system plays an important position. On the one hand, it is the heart of the system. On the other hand, its energy consumption is a major part of the total system energy consumption. So the central air conditioning system of cold and heat source control, relates to the whole quality of the central air conditioning system design, but also related to the owner in the process of using cost. On the cold and heat source system for room group control help saving energy and saving the operation cost； help to improve equipment utilization efficiency and prolong the life of unit； reasonable group control make the system more comfortable and avoid too cold and more easily to meet the design requirements. This paper mainly discusses Room group control’s controlling plans and system design.Room group control using a pump with variable flow control strategy, namely according to the frozen water supply and return water temperature that temperature difference, flowmeter and the running status of chillers, automatic calculation of actual required cooling load. According to the requirements of actual cooling load automatic adjustment of chiller units, to achieve the best energy-saving effect. According to the pressure difference, regulating the pump frequency, keep the system stable frozen water pressure difference, thereby ensuring the load side enough water. According