毕业论文--基于51单片机的双精度电子称设计.docVIP

摘要Abstract With the rapid development and application of digital technology, electronic weighing technology has been developed and applied extensively .And a variety of intelligent digital electronic weighing is emerging progressively, but in small and middle market, the commercial electronics, which is an important part of the electronic weighing, is still limited to the simple electronics said such as steelyard, platform scales and simple electronics. All these are known as the main commercial electronic scales, but the existence of accuracy, easily damage, and difficult to repair defects also affect itself. Especially during weighing some minor objects such as tea, medicinal herbs, mistakes is easy to appearance through measuring. This paper, the design of the double-precision electronic using microcontroller AT89S52 as the core, achieve the simulation capabilities of electronic design by using Proteus Software and KEIL software. Now dividing this paper into five main modules: how to collect the weight of the object with this double-precision electronic said module, how to deal with the data through single-chip machine, how to control keyboard module, the display module and how to drive software module. Fristly, use different pressure sensor to acquire pressure parameters. Secondly the signal processor and A / D conversion work out the data, finally given to the MCU. Thridly according to the data above the MCU will automatically select whether the 12 precision values ??or 8 precision value computing processor. Ultimately the input through the keyboard will be showed on the LCD12864 real-time display. The entire electronic system can intelligently accomplish double-precision measurement automatically, automatic alarm, visual display, at the same time, it’s easy to operate, accurate measurement, low cost, stability and high reliability. Based on the introduction