论文-电力电子电路典型环节的MATLAB仿真.docVIP

电力电子电路典型环节的MATLAB仿真 摘要 本文主要研究了电力电子电路典型环节的MATLAB仿真，并完成了图形用户界面（GUI）的设计。 本文首先介绍了MATLAB软件及其图形仿真界面Simulink的基础应用知识，然后介绍了用于电力电子仿真的SimPowerSystems中的各种模块库，完成了对整流电路、斩波电路典型环节的建模与仿真，并且给出了仿真结果波形。Matlab/Simulink，GUI仿真，整流电路，斩波电路Abstract This paper mainly studies the MATLAB simulation of the typical session to the power electronic circuit, and completed the design of graphical user interface (GUI). This article first introduces the MATLAB software and the application of knowledge based on graphical interface Simulink simulation, and then introduced the various modules of SimPowerSystems library for the power electronic simulation, also completed Modeling and Simulation to the typical session of rectifier circuit and Chopper circuit, and show the results of the simulation waveform. Model simulation and GUI interface design is the difficulty of this paper. We based on previous studies, improved circuit simulation on the combination of MATLAB, and gain the simulation model. In order to make the simulation more intuitive and easy to operate, our paper links the various circuits were designed for a GUI interface, and we also gives the GUI interface operation and the effect of scheduling interface. The results of circuit model simulation and the operation of GUI design show that the simulation reached a basic simulation of power electronic circuit level, and achievement the basic functions mission provided of the book. Finally, this paper summarizes the research results and makes suggestions for further improvement. Keywords: Matlab/Simulink, GUI, Simulation, Rectifier circuit, Chopper circuit 目录 前言 1 第1章 概述 2 1.1 国内外研究概况 2 1.2 本课题的研究内容 3 1.3 本课题的研究目的与意义 3 第2章 MATLAB/SIMULIK基础知识 4 2.1 MATLAB介绍 4 2.1.1 MATLAB主要组成部分 4 2.1.2 MATLAB的系统开发环境 5 2.2 SIMULINK仿真基础 6 2.2.1 SIMULINK启动 7 2.2.2 SIMULINK的模块库介绍 8 2.2.3 电力系统模块库的介绍 9 2.2.4 SIMULINK的仿真步骤 10 2.3 MATLAB的GUI程序设计 10 2.3.1 控件对象及属性 11 2.3.2 GUI开发环境 12 2.3.3 GUI程序设计步骤 12 第3章 整流电路的SIMULINK仿真设计 14 3.1 单相桥式整流电路的仿真 14 3.1.1 单相桥式全控整流电路的工作原理 14 3.