SANS 719-2008 Electric welded low carbon steel pipes for aqueous fluids (large bore)英文版.pdfVIP

ISBN 978-0-626-20745-8 SANS 719:2008 Edition 3.1 Any reference to SABS 719 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electric welded low carbon steel pipes for aqueous fluids (large bore) Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za © Standards South Africa SANS 719:2008 Edition 3.1 Table of changes Change No. Date Scope Amdt 1 2008 Amended to change the designation of SABS standards to SANS standards and to update the definition of acceptable. Acknowledgement Standards South Africa wishes to acknowledge the valuable assistance derived from publications of the following organizations: American Petroleum Institute British Standards Institute Deutscher Normenausschuss Foreword This South African standard was approved by National Committee StanSA SC 5120.12D, Water and sanitation – Equipment and systems – Copper pipes and steel pipes and fittings, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in February 2008. This document supersedes SABS 719:2002 (edition 3). A vertical line in the margin shows where the text has been technically modified by amendment No. 1. Annex A forms an integral part of this document. Annex B is for information only.