应用单片机电子闹钟设计毕业论文论文.doc

中州大学工程技术学院 毕业论文 （电工教研室） 题目:应用单片机电子闹钟设计 专 业: 应用电子技术 班 级: 10级应用电子班 设 计 人: 刘 玥 学 号: 201025110223 指导教师: 张 秀 奇 设计时间： 2013年 4月2日 摘 要 单片机自20 世纪70 年代问世以来，以其极高的性能价格比，受到人们的重视和关注，应用很广、发展很快。而51 单片机是各单片机中最为典型和最有代表性的一种。 本设计以AT89C51 芯片为核心，辅以必要的外围电路，设计了一个结构简单，功能齐全的电子时钟，它由5V 直流电源供电。在硬件方面，除了CPU 外，使用八个七段LED 数码管来进行显示，LED 采用的是动态扫描显示，使用74LS245 芯片进行驱动。通过LED 能够较为准确地显示时、分、秒。四个简单的按键实现对时间的调整。软件方面采用C 语言编程。整个电子钟系统能完成时间的显示、调时、校时和三组定时闹钟的功能。 选用单片机最小系统应用程序,添加比较程序、时间调整程序及蜂鸣程序，通过时间比较程序触发蜂鸣，实现闹钟功能，完成设计所需求的软件环境。介绍并使用Keil单片机模拟调试软件，测试程序的可行性并用Proteus 进行仿真。 关键词：单片机，定时器，中断 ABSTRACT Because of its extremely high performance-price ratio, the single-chip computer (SCC)has been paid great attention to ever since it came out in 1970s of 20th Century, and has gained an extensive applicable field and fast development. Among all kinds of SCCS, 51SCC is the most typical and representative one. This design, adopting AT89C51 chip as the core part with some necessary peripheral circuits, is a simple electronic clock which uses 5V DC as the power supply. In hardware aspect, besides the CPU, eight seven-segment LED digi-tubes are used for display, which work in a dynamically scanning display mode and driven by 74SL245 chip. The LEDS can accurately indicate hour 、minute and second. Four buttons can be used to adjust the time. While in the software aspect, the programming language is C language. The whole electronic clock system has functions of time display, adjustment 、timing and three groups of alarm function. Choose the smallest SCM system applications,add Comparison procedures, time to adjust procedures and faint buzzing procedures, Through relatively faint buzzing trigger procedures to achieve alarm clock function, Completed the design needs of the software environment. Keil introduced and the use of SCM software simulation debugging, testing the feasibility and proteus by simulation. Key word： si