采矿工程专业毕业论文--煤层注水防尘工艺及其参数选择(济三矿6.0 Mta新井设计).doc

采矿工程专业毕业论文--煤层注水防尘工艺及其参数选择(济三矿6.0 Mta新井设计).doc

  1. 1、本文档共180页,可阅读全部内容。
  2. 2、本文档内容版权归属内容提供方,所产生的收益全部归内容提供方所有。如果您对本文有版权争议,可选择认领,认领后既往收益都归您。
  3. 3、本文档由用户上传,本站不保证质量和数量令人满意,可能有诸多瑕疵,付费之前,请仔细先通过免费阅读内容等途径辨别内容交易风险。如存在严重挂羊头卖狗肉之情形,可联系本站下载客服投诉处理。
  4. 文档侵权举报电话:400-050-0739(电话支持时间:9:00-19:00)。
摘要 本设计包括三个部分:一般部分、专题部分和翻译部分。 一般部分为t/a新井设计。济宁三号煤矿位于山东省济宁市任城区境内,隶属兖州煤业股份有限公司交通便利井田走向()长约,倾向()长约,井田总面积为2。主采煤层为煤,平均倾角为6.37°,煤层平均总厚为.63 m,16下煤层平均总厚为.33 m。井田地质条件较为简单 井田工业储量为万t,矿井可采储量56319万t。矿井服务年限为a,矿井正常涌水量为335.6 m3/h,最大涌水量为m3/h。矿井瓦斯涌出量较,为瓦斯矿井。 井田为开拓。煤大巷采用胶带运输机运煤,辅助运输采用无轨胶轮车设备。矿井通风方式为式通风 矿井年工作日为30d,工作制度为四六制。 一般部分共包括10章: 1.矿区概述及井田地质特征 2.井田境界和储量 3.矿井工作制度及设计生产能力、服务年限 4.井田开拓 5.准备方式——区巷道布置 6.采煤方法 7.井下运输 8.矿井提升 9.矿井通风安全 10.矿井技术经济指标。 专题部分题目是 翻译部分主要内容为。 ABSTRACT This design includes of three parts: the general part, special subject part and translated part. The general part is a new design of mine. Jisan mine lines in JiNing in ShanDong province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 7.14 km ,the width is about 7.02 km,well farmland total area is.The three and the sixteen are the main coal seams. The thickness of the three mine is about6.63 m in all。The thickness of the sixteen mine is about5.33 m in all。 The proved reserves of the minefield are 827.74 million tons. The recoverable reserves are 563.19 million tons. The designed productive capacity is 6 million tons percent year, and the service life of the mine is 72. 2 years. The normal flow of the mine is 335.6 m3 percent hour and the max flow of the mine is 552.5 m3 percent hour. The mineral well gas gushes the deal lower, for low gas mineral well. The well farmland is a single level in an inclined well to expand. The working system “four-six” is used in the Jisan mine. It produced 330d/a. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the mine; 10.The basic economic and technical norms. Special subject parts of topics is about the technique o

文档评论(0)

mkt365
该用户很懒,什么也没介绍

相关文档

相关课程推荐